This is a little one but I actually got a 'little job' done.  I had a lace curtain in my bedroom that was way too long.  For several months I tried to pretend that it was OK because it was artistically draped but the reality of a little kitten meant I had to do something.

This is the point I would show you the before photo. 'Aha' I thought.  I don't need to worry as I can use that photo from when I first painted.  Trouble is, it turns out that photo was prior to me getting the curtain.  So the short version is, I don't have a before.  But I did cut off over 20 cm of material and the amount of material folded over for the new pocket was... hmm, 5+5 for the pocket, 1.5+1.5 for the bit at the top plus another 1cm for the folded mock french seam... 14cm?  ish?

Anyway, there was a lot of excess.  Got that mental picture in your head?

OK.  So here's the after.  I was quietly astonished that it is A) straight and B) not a teeeeennyy bit too long or short in a Murphy's law kind of way.  Woohoo!

It wasn't terribly high tech.  Basically I first measured to see what length I wanted (197 cm).  Then I laid it out in the most open area I had (dinning room floor).   Then I did the above again AFTER the cat didn't think this was the best new toy ever *sigh*
Using pins, I added a pin to mark the bottom of the pocket, top of the pocket (5cm), 1.5 for the top bit x2 (as it will be folded over here), 5cm for the other side of the pocket and 1cm to fold over for the seam.  That was the point that I then very very carefully cut so it wasn't wonky.

After that, I pressed the folds before sewing (very low heat, no steam as I think it was synthetic material).  That made the sewing SO much easier.  Fold the 1cm edge over first (this hides it in the pocket and makes a nice finish) and press.  Then I used the nice ironed line to measure the other fold line- 6.5 cm from the new fold to the old, pin in place then press.

Finally, sew the two seams- I used a zig zag stitch as my two second google research says that's best for lace/shear fabric.  One just above the bottom fold first (the bottom of the pocket) then the other at the top pocket line.  Not having a cat jump on the material can be helpful in this case, as can that cat not deciding that it was time for cuddles...

And of course don't get me started about putting the curtain up and the joy of a certain four legged, fur covered creature deciding to play with the big pile of lace again...  Sill, he's cute so he's easily forgiven.

Interchangeable patches

This is not a full project but more of an idea that you can implement into a project.  A few posts ago I showed off my little embroidery that came with a cute bag kit.

It's OK but it's not 100% my style although the bag is cute.  Now I could make the bag without the embroidery or I could put it on anyway and deal but then I got thinking.  What if I could do both?

This is a bit of a 'make it up as you go along' job with the odd ebay purchase to help.  The first step was from the kit- make up the backing border.  This is pretty basic- two pieces of fabric cut to size (allowing for seam allowances) and then sew around the edges, right sides facing.  Then cut a hole in one side to allow you to turn it inside out to make a little pocket thing (this hole is going to be the back when it's attached to the bag).

This is the point where things take a turn.  Jumping on ebay, I found some very thin little powerful magnets- you can see one of them in the photo above.  They are about 1 mm thick but are strong enough to stick to a metal washer through a layer of material (I checked before sewing them in).

Handsew these into place inside the fabric pocket onto the BACK piece of material.  That way the front stays nice and plain.

This is the BACK view of the pocket- you can tell by the rough slit to gain access and the stitch marks holding those magnets into place

Then all you need to do is sew some metal washers onto the back of whatever pieces you want to add to the patch.

Not the most pretty sewing job but shhh, no one else is going to see this bit!

Put the top patch in place and the magnets will hold it in place nicely

With four magnets (plus I bought an extra just in case that I've just stuck in the pocket with the others to add a bit of oomph) it's more than enough to hold the patch in place- holding it up and giving a good shake doesn't move it so it should?  be enough to keep things in place.  At least for something with low interaction- it probably will not work as well as is on a piece of clothing that rubs and catches on other things.  You could boost the strength in the attachments if you used more magnets instead of washers to the embroidery- just make sure you don't sew the magnets the wrong way so they repel rather than attract!

Feel free to leave a comment if you try it!  I realise that I could also have used velcro, but this way you don't see anything if the embroidery isn't put into place.  Plus maaagneeets...

More embroidery...

I seem to duck into different crafts in phases- one big or several small projects in one craft until I get tired of it then off to find a new exciting project.  What, me get distracted?  Oooh, kitty!

Meet George, my new kitty

Ahem.  So as I was saying, I've finished another embroidery- just started it because I was in the mood to do something small, easy to do on the couch and pretty.

The trouble was that crease above the trees.  That's AFTER washing and ironing it with steam.  Grrr.

So I hit google for ideas.  The easiest fix I found with stuff I had was to put some vinegar onto the crease as the acid would help loosen the fibres to iron the crease out.  Then wash it in water to remove the vinegar.  Here's the finished result after ironing and letting it dry

It hasn't completely removed it but it is well and truely in the background now, particularly with the 'bumpy threads' nature of the fabric itself.  I'd call it plausible (sorry, I've been watching a lot of Mythbusters on the break!)

And bonus round, here's a sweet little shadow work embroidery I did (see the theme conversation at the start of this post!)

Bunny bags

This is not the most high tech project but it is fun and good to do with the kids (or for the kids as it is in my case).  If you've not been in the shops since Jan 1 when the hot cross buns hit the shelves, Easter is coming.   I have three nibblings (my favourite word discovery recently- the plural of both nieces and nephews) and of course as a doting aunt, I have to get them chocolate.  But there is a bit of a mix of things to give (in part because one needs dairy free chocolate so that has to be different from the other two).  So I needed bags.

However, when I went to the shops, 'Easter bags' were starting from $2 each which seems silly for a bag you can't reuse for the next birthday/Christmas/present giving occasion the way that normal gift bags can.  But plain brown paper bags were only $2 for three.

So I was at home looking at my boring brown bags and decided to try and smarten them up.  Step one, cut out three pairs of ears from white paper and pink paper.  Nothing fancy, but I was sneaky and doubled over the paper prior to cutting so the rough, uneven ear would match the other.  Glue the parts together.

Next step, the tail.  I don't have a pompom stash at home so if you do, you could miss this step if you liked.  I tried two methods- using two discs of card with a slit cut through it to wrap wool around or wrap wool around the four fingers of the other hand (there are tons of pictures and explainations on how to do this on google).  The finger method was far faster than the card method, although the pompom was much neater than using the card method.

Both methods are much easier without certain assistance from George...

Finally glue the ears on the inside of the front of the bag and glue the pompom tail to the back (craft glue was good for this) and let dry.

Have fun and happy Easter!  And if you are one of my nibblings, no you can't find out what is inside until Easter.  Assuming the bunny inside doesn't eat it before then...

I've said it before, kits are good holiday go tos

Labour day was a little while ago but since I've not gotten around to photographing this until now, here's a new post!  This is part of a cute little bag kit I bought from a patchwork and quilting shop in NSW a few years ago on my travels and it was perfect to throw in a bag and take camping.

I tweaked the pattern a little- I added boards to the boat (it was just an outline originally) and changed the colours of the fish because I preferred the green and yellow.  The boards are a little wonky and uneven but I choose to call it quaint and rustic instead of 'wobbly because you really should've drawn it on before you started'.  The important thing for any project is to know how justify... innovative differences caused through inattention...